Are you a Honda Civic car owner and recently noticed your window won’t go up? That can be an annoying issue, especially in the summer. You want to keep out the hot air and let in a nice breeze but can’t do that if your window won’t budge.
Don’t worry, because help is on the way. We have some tried and tested tips that will get your window up and running again in no time.
Why is my Honda Civic window not going up?
Here are the most likely reasons your Honda Civic window isn’t going up.
- Broken window regulator/motor
- Faulty power window switch
- Bad wiring
- Blown fuse
- Dirty or faulty door lock mechanism
- Debris blocking the window track and causing it to stick
Now let’s figure out how to fix each of these causes.
Broken Window Regulator/Motor
First, let’s look at the window regulator or motor. This is the device that helps your window go up and down. The window regulator or motor is located at the back side of the door. If it’s broken, then your window won’t move.
Symptoms/sign: If you can hear a clicking sound when you try to move the window, then it’s likely the window regulator or motor has gone bad. It’s also possible for one side of the window to go up but not the other.
How to fix it: If you think the window regulator or motor might be broken, then the first thing to do is to check for any loose connections in the wiring harness.
If there are any loose connections, then you can either fix them yourself or have a professional replace the wiring harness.
To check the wiring harness, you will need a multimeter.
First, disconnect the negative terminal of your car battery to prevent any electrical mishaps.
Then, using the multimeter set to measure resistance, test each wire in the harness for continuity.
If there is no continuity on certain wires, then those are most likely the ones that are causing the issue with your window
If the wiring harness looks okay, then it’s time to replace the window regulator or motor. Depending on your Honda Civic car’s model and make, you may need to buy a special tool to help you with the job.
The process of replacing a window regulator or motor can be complicated. It involves taking off interior trim and panels as well as disconnecting the door latch. So, if you’re not confident of doing it yourself, then it’s best to get a professional to do the job for you.
Fixing Faulty Power Window Switch
The next cause is a faulty power window switch. This is the switch that helps control your windows and makes them move up and down. If it’s not working properly, then your window won’t go up or down.
Symptoms/signs: One way to tell if the power window switch has gone bad is if you experience difficulty in controlling the windows. This could include things like having to press multiple times for the window to move, or it might not move at all when you press the switch.
Another sign is if you can hear a faint clicking sound whenever you press the switch. This indicates that the switch is not making proper contact with the power window motor.
Or, if you detect any corrosion or rust around the power window switch, then this could be a sign of a faulty switch as well.
How to fix it: In most cases, the power window switch can be easily replaced. You’ll need to remove the door panel and disconnect the wiring harness before replacing it with a new one.
If you don’t feel confident about doing this job yourself, then it’s best to get a professional to do it for you. They will have the necessary tools and expertise to do the job quickly and correctly.
Fixing Bad Wiring
If the wiring is bad, then your window won’t go up or down either. This can be caused by a number of things such as corrosion, dirt and grime buildup, or just plain old wear and tear.
Symptoms/signs: If you notice a burning smell coming from the door panel or see sparks in the area. It could be a sign that your wiring is bad and needs to be checked out. You may also notice flickering lights or strange sounds coming from the door panel as well.
How to fix it: You can try cleaning the wiring first, as this should help in some cases. Then you can check the connections and if needed, replace any broken wires. If all else fails, it might be best to get a professional to take a look at your wiring for you.
Fixing Blown Fuse
The next cause is a blown fuse. This can be caused by excessive current flow or an electrical surge. If your window won’t move up or down, then it could be because of a blown fuse.
Symptoms/signs: The signs of a blown fuse are usually the same as a bad switch or wiring. You may see sparks or hear clicking noises coming from your window motor, flickering lights, or you could smell a burning smell from the door panel.
How to fix it: You can try replacing the fuse first, and if this doesn’t work then you might need to check the wiring or switch. Then replace any broken wires or faulty parts.
It’s best to get a professional to help with any wiring or electrical-related issues as they have the right tools and experience for the job.
Dirty or Faulty Door Lock Mechanism
The door lock mechanism can also cause your window to not go up or down. If it’s dirty or faulty, then it won’t be able to move the window.
How to fix it: To fix this, you’ll need to clean and lubricate the door lock mechanism.
To clean the door lock mechanism, use a soft cloth and some mild soap or detergent to remove any dirt and debris. Then lubricate the mechanism with light oil or WD-40.
Debris Blocking Window Track
Finally, debris can also block the window track and cause it to stick. If you find that your window is stuck in one place, then it’s likely due to debris blocking the track.
How to fix it: To fix this, you’ll need to remove the debris and then lubricate the window track.
To remove the debris, use a vacuum to suction out any dirt or dust. Then clear away the remaining debris with a soft cloth or brush.
After the window track is clear of debris, lubricate it with light oil or WD-40. This will help ensure that the window moves freely and smoothly.
With these simple steps, you should be able to get your Honda Civic window up and running again in no time!
If you’re still having issues with your window going up or down, it’s best to consult a professional for help. They can provide advice and guidance on the best way to fix the issue.
Important: Following these tips should help you get your Honda Civic window working properly. If all else fails, contact a professional mechanic to take a look at the issue and provide assistance.
How do you reset the power window on a Honda Civic?
Resetting the power window on a Honda Civic is a relatively simple process that only requires a few steps.
Here’s how to do it:
- Locate the fuse panel in your Honda Civic and locate the fuse labelled “Power Window”.
- Pull out the Power Window fuse and wait for 10-15 seconds.
- Reinsert the fuse back into its slot and close the fuse panel.
- Press and hold down the power window switch for 5 seconds, then release it.
- Test your power window by pressing the switch up or down to see if it moves as normal.
If all goes according to plan, you should have successfully reset your Honda Civic’s power window. If the issue still persists, it is best to consult a professional mechanic for help.
It’s important to remember that if you’re ever unsure about any kind of repair work on your Honda Civic, it’s best to leave it up to the experts.
Honda Civic passenger window not working
If your Honda Civic’s passenger window is not working, it could be due to a number of issues. It’s best to investigate the issue further by first checking the fuses and power switches for any possible electrical problems.
If those seem to check out, then you may need to inspect the window regulator or motor for any broken parts.
Depending on the extent of the damage, it may be a simple fix such as replacing the window motor, or an extensive one involving replacement of the entire passenger door.
It’s always best to consult a professional mechanic for help with this kind of repair work.
Summary
All in all, the Honda Civic window won’t go up is a common problem faced by many car owners. Fortunately, there are some simple steps you can take to troubleshoot the issue and get your window back up and running again.
By following the steps outlined above, you should be able to quickly identify and resolve the issue.
However, if the problem persists or you are unsure how to proceed with the repair work, it’s best to consult a professional for help. With their expertise, they can guide you on the best course of action to take. Good luck!
Sources
https://repairpal.com/honda/civic/stuck-car-window
You May Also Be Interested In Reading
BMW Window Won’t Go Up (Here’s What to Do and How to Fix it) Tesla Window Won’t Go Up (Here’s the Root Causes and How to Fix It) Subaru Window Won’t Go Up (Here’s the Possible Causes and Solutions) Dodge Caravan Window Won’t Go Up (Here’s the Simple Fixes)