If you’re a Subaru car owner, you may have encountered the common issue of your window not functioning correctly.
This can be especially troublesome when it comes to driving in inclement weather or even on a warm summer day when you want to get some fresh air while on the road.
Here are some steps that you can take to help resolve this issue and get your Subaru window working properly again.
Why Subaru Window Won’t Go Up?
The most common cause for a Subaru window that won’t roll up is a faulty power window switch and a broken power window regulator.
Other issues that can cause windows to not go up include the window track being blocked, the window motor being dead, glass shifting out of place and broken or faulty switch.
Below is the cause of why the Subaru window won’t roll up and how to fix it.
Faulty power window switch
The first step is to check the power window switch. If the switch isn’t working properly, it can cause your window to malfunction.
The power window switch is an important part of your Subaru vehicle’s electrical system. It’s responsible for controlling the up and down movements of the windows.
If the switch is not working properly, you may notice that your window will only move up or down partially instead of fully. It can also cause it to take longer to open and close.
Another sign that your power window switch may be faulty is if you hear a clicking noise when trying to open or close the window. This usually means the switch is not getting the signal it needs to operate correctly.
If you have noticed any of these symptoms, then it’s time to replace your power window switch. Replacing the switch is a relatively straightforward job and can be done quickly by an experienced mechanic.
Broken power window regulator
This part attaches the motor to the window and helps it move. Over time, it can break or become worn out, making it difficult to get the window up.
The regulator is what moves the glass in and out of the door frame, so if it’s not working properly it can cause your window to not go up or down.
If you need to replace your window regulator, then you’ll need to remove the door panel from your vehicle. Once you have the door panel off, you can access the window regulator and replace it with a new one.
A broken window regulator can cause a variety of problems. You may notice that your window will move up and down erratically, or it may stop responding completely. If you find that the window won’t roll up at all, then this is likely caused by a broken regulator.
Replacing a window regulator can be a tricky process, as it requires taking apart the car’s door panel. Once you have the door panel off, you can access the window regulator and replace it with a new one.
The window track is blocked
The window track in your Subaru may be blocked by debris or dirt, preventing the glass from sliding properly, and making it difficult to get your window up.
Cleaning out any obstructions can help to alleviate this issue.
To check if this is the issue, you will need to take off the door panel and look inside. If you see any dirt or debris blocking the track, use a vacuum cleaner to remove it. Once you have cleared the blockage, reassemble the door and see if your window has gone up.
Window motor is dead
If the window regulator and tracks are both working properly, then it may be the case that your window motor is dead.
The window motor is the device responsible for powering the window up and down. It’s powered by a wire harness and if this gets damaged or disconnected, then you won’t be able to move your window up or down.
If your window motor is dead, you may hear a clicking noise when you try to move the window, but it won’t budge. You may also notice that other electrical components connected to the window do not work.
If these symptoms are present, then it’s likely that your window motor needs to be replaced.
Replacing the window motor is possible, but it’s usually an involved process. You’ll need to take off the door panel and disconnect the old motor before connecting the new one.
If you don’t feel comfortable taking this on yourself, it’s best to get a professional mechanic to do the job. That way, you can be sure that the window motor is connected correctly and your windows will operate smoothly.
Glass has shifted out of place
If the glass in your Subaru has shifted out of place, it can prevent the window from going up. Realigning the glass should help to get the window back in working order.
To realign the glass, you’ll need to carefully insert a thin piece of plastic between the glass and window frame, then push the glass back into place.
You may need someone to help support the glass from outside while you do this. Once it’s in position, your window should go up as normal.
The fuse for the power windows might be blown
The fuse helps to protect the electrical components in your car, and if this blows, then certain systems will stop working.
The most common symptom of a blown fuse is that none of the windows on your Subaru will move up or down, even with the switch pressed. This indicates a problem in the circuit.
You can check if this is the cause of your issue by locating the fuse box, which is normally found beneath the steering wheel or on the driver’s side of the dash.
Once you’ve located it, open it up and look for any blown fuses. If you find one, replace it with a new one and try the window switch again.
Wire connection loose or faulty
If the fuses are not to blame, then it could be something more serious such as a loose or faulty wire connection. This can cause power from the battery to stop flowing, preventing your windows from opening and closing.
If the power windows on your Subaru are not working, you may notice that the windows do not move at all when the switch is pressed. This could be a sign of a loose or faulty wire connection. Other signs include flickering lights in the car or dimmer headlights than usual.
To check this, you’ll need to locate the window motor in the door panel and inspect all of its wiring connections. If any of them appear to be loose or melted, then you’ll need to replace the connection with a new one.
Door panel damaged
In some cases, the door panel itself may be at fault. If this is the case, then you’ll need to remove it and inspect it for any visible signs of damage such as scratches or dents.
If the door panel on your Subaru is damaged, then it may cause the window to not open or close properly. This could be due to a broken seal between the door panel and the window frame, allowing air to leak in and preventing proper operation.
You may also notice that the window does not fit securely within its track, which can prevent it from opening and closing smoothly. In this case, you’ll need to replace the door panel with a new one.
In some cases, the window may still be able to open and close, though you may hear grinding or popping noises when doing so. This is another sign that the door panel may be damaged and needs to be replaced.
Whatever the cause, it’s important to make sure you troubleshoot properly and determine the root of the problem before attempting any repairs. A professional may also be able to provide better advice and assistance in finding the best solution.
FAQs
How do you reset the power window on a Subaru?
If your Subaru’s power window is stuck or won’t open, you may need to reset it to restore normal function. Fortunately, this can be done fairly easily by following a few simple steps.
- Locate the power window switch located on the interior of the car.
- Depress and hold down the window switch for four to five seconds until you hear a clicking sound.
- Release the switch, then press it again for another two or three seconds until you hear a second click.
- Test the window by pressing the switch up and down to see if it properly opens and closes.
Subaru outback window goes up then down
If your Subaru Outback’s window is going up and then down on its own, this may indicate a problem with the power motor or regulator. You’ll need to have these parts inspected and possibly replaced in order to restore normal function.
You may hear grinding noises when attempting to open and close the window, or it might be stuck in one position altogether.
The most likely cause of this issue is either an electrical malfunction or a broken cable within the power window motor assembly. If this is the case, you’ll need to have an automotive technician replace the motor and/or cable in order to restore normal functioning.
It’s also possible that the window regulator has become worn or damaged, causing it to malfunction. If this is the case, then a new window regulator must be installed in order for the window to operate properly.
Subaru Outback window stuck down
If your Subaru Outback window is stuck down, you’ll likely notice a clicking sound when you press the power window button.
This indicates that the motor is trying to move the window but it won’t budge. You may also hear a rattling noise, as the motor continues to attempt to move the glass.
One of the most common causes of a stuck Subaru Outback window is worn out weather stripping or door seals. Over time, they wear down due to humidity and temperature changes.
Another cause could be an electrical issue. The window motor could be worn out, or the wiring may have become corroded and needs to be replaced.
If you suspect that the problem is with the weather stripping or door seals, you can try lubricating them with a silicone spray.
If the problem is electrical, you’ll need to consult a professional or replace the window motor. It’s important to find and fix the underlying issue in order to keep your window from getting stuck again.
How to replace Subaru’s faulty power window switch?
If you have a faulty power window switch on Subaru, it is time to replace it. Replacing the switch is not difficult, but some basic tools are needed.
Step 1: Gather Your Tools and Materials
Before you begin, make sure you have all the necessary tools and materials. This will include a new power window switch, a flathead screwdriver, a Phillips head screwdriver, and possibly a pair of pliers.
Step 2: Remove the Door Panel
Start by removing the door panel to gain access to the power window switch. This will generally involve removing a few screws and then using a flathead screwdriver to gently pry off the panel.
Step 3: Remove the Old Power Window Switch
Once the door panel is removed, you’ll need to locate the old power window switch. It’s usually located near the front of the door panel and may be held in place by a couple of screws. Remove these screws and gently pull out the old switch.
Step 4: Install the New Power Window Switch
Take your new power window switch and connect it to the wiring harness. Make sure all connections are secure before placing it back into the door panel. Then, replace any screws that were removed and reattach the door panel.
Step 5: Test the New Power Window Switch
Once everything is back in place, test your new power window switch to make sure it’s working properly. If your windows now go up and down smoothly, then congratulations, you’ve successfully replaced your power window switch! If not, double check all connections and make any necessary adjustments.
So, you’ve followed all the steps and your Subaru window still won’t go up? Don’t worry, there are a few potential reasons for this. One possibility is that the issue lies with the window motor itself. In this case, it may need to be replaced or repaired by a professional mechanic.
Summary
By following the simple guide above you might be able to diagnose and fix the issue yourself. But if the problem is more serious, you should consult an automotive technician or take your car to a dealership for repairs.
By keeping up with routine maintenance of your Subaru window, you can ensure that all of your windows and doors are in proper working order.
Sources
https://repairpal.com/subaru/outback/stuck-car-window
You May Also Be Interested In Reading
BMW Window Won’t Go Up (Here’s What to Do and How to Fix it) Tesla Window Won’t Go Up (Here’s the Root Causes and How to Fix It) Honda Civic Window Won’t Go Up (Causes and Effective Solutions) Dodge Caravan Window Won’t Go Up (Here’s the Simple Fixes)